how much does a heater repair cost

How Much Does a Heater Replacement Cost?

Around 47% of homes in the United States use natural gas as a source of heating for their homes while other houses use methods such as electric heating and so on.

Whatever the case, if you find that your heater is starting to become less and less efficient, or if it has already broken down, you might be wondering about the heater replacement cost.

After all, going without a heat pump or a furnace can be hard to deal with, especially in the colder months.

So, how much can you expect to pay when you get a new heater from a heater replacement company?

Keep reading and learn more about what can affect the price below.

How Much Does a Heater Replacement Cost?

On average, you can expect to pay between $3,000 and $10,000 for a new heating pump.

This may sound quite expensive for a simple pump, and it is.

The thing about replacing a pump like this is that a lot of labor goes into the task.

You might be wondering why the price can range so widely.

This is because a lot of factors can affect the exact price of a single heating pump.

After all, you are not only paying for the heating pump, but also the cost of installation and so on.

There are also different types of heat pumps that may change the cost.

For example, there are ductless heat pumps as well as geothermal heat pumps and so on.

The more advanced models, of course, will cost more than the older and more traditional models.

If you want only the very basics from your heat pump, you might be able to get away with paying near the minimum of that range around $3,000.

However, some locations may have even cheaper (or more expensive) prices.

Usually, prices in cities are higher than they are out in more rural areas.

The Details

Also, keep in mind that $10,000 is not the most expensive price for replacing a heater.

There are some heaters that can easily cost you more than $20,000 and that isn’t even including the cost of installation or moving the pump.

Of course, the more expensive heaters tend to be those that are more efficient and powerful.

But as long as you live in a warm area, you shouldn’t have to spend so much on a new heater since you’ll likely not need to use it that often anyway.

On the other hand, if you live in an environment that is often cold or gets cold every night, then an advanced heater may be a good investment as long as you’re willing to spend some extra money.

Otherwise, it is usually fine to opt for a relatively average heat pump.

That way, the new heat pump can work when you need it and you can turn it off when it isn’t necessary and you won’t need to worry too much about how much you spent on it.

But besides the type of heat pump you’re dealing with, what other factors can affect the price of this replacement?

Cost of Labor

Besides the cost of the furnace itself, you’ll have to factor in the cost of the installers you hire.

While you can try installing a heat pump on your own, this isn’t recommended, especially if you’ve never done it before.

If you try to do something like that, you will most likely make a mistake and you might even damage the heat pump in the process.

This is not to mention that trying to do it yourself will take a very long time.

Hiring professionals to do it for you is by far the better option for several reasons.

For one, professionals have plenty of experience with installing things like this.

For that reason, professionals will also be able to install a heat pump much faster than you could do it yourself.

That way, you won’t have to wait so long just for the heat pump to get up and start working.

Besides that, professionals will do a good job when installing a heat pump so that no parts or pieces will get damaged in the process.

This is not to mention that they will do all the heavy lifting so you can focus on other important tasks in your life rather than installing a heat pump.

Because of all the ways professional installers can benefit you, it only makes sense that the cost of labor will be relatively high.

Of course, the exact price will depend on your location and what kind of people you hire.

If you hire high-quality professional heater installers, you might have to spend an extra money on the cost of labor alone.

But if you choose a more agreeable and still high-quality heater replacement company, you likely won’t have to pay as much, maybe only a few hundred dollars.

What You Need to Know

Once you get your heater installed, it is always important to have regular inspections to prevent further heater problems.

This is because HVAC problems can happen at any time, even if the unit is still relatively new.

By having professionals take a look at the heater every so often, you won’t have to worry so much about replacing a heater, especially if you maintain it like you’re supposed to.

Another thing about the cost of labor is that the total cost will greatly depend on how long the professionals need to work on the heater.

If the professionals charge by the job, then the cost will obviously be more.

However, if it is only a simple job that doesn’t take very long, then the cost of labor might not be very high at all.

There is also the case of professionals who charge by the project rather than by the hour.

If this is the case, then the price will be more dependent on how much that individual company decides to charge you based on the labor they expect from the job.

Additional Materials and Ductwork Installation

If the ductwork in your home is old or is not installed properly, it will also need to be tended to if you want your heater to work.

This, of course, will increase the price of the entire project.

The price of new ductwork can depend on a variety of things just as the price of a heater replacement can vary.

You will also need to consider the cost of ductwork installation and what kind of ductwork you get.

Besides that, you may need to pay for additional materials that you didn’t account for in the installation process.

This usually isn’t necessary in most cases, but there are still some incidences in which you may need to pay a bit extra for an extra part here and there.

Fortunately, small parts usually don’t cost that much, so you shouldn’t have to worry too much about that.

And of course, not everyone needs new ductwork either, so you can save money if you already have perfectly good ductwork.

What to Know

Besides that, you also have to think about the time of year you get your heater installed.

Not many people know that certain times of year are more expensive to install heaters than others.

In particular, the busy season is the most expensive time of the year to get a new heater.

While the prices won’t be drastically different, you likely will have to pay a few hundred dollars more than average.

On the other hand, if you manage to get your heater installed during the slow season, you might be in luck and you might even be able to save a few hundred dollars.

Of course, if you need a heater right away and happen to be in the busy season, there’s not much you can do about that.

To get the price you want, you’ll have to balance the price of the heat pump along with the price of the installers you chose.

As long as you do that, you should stay well within your budget without any problems.

All About the Heater Replacement Cost

There is no single heater replacement cost and the exact price can vary depending on a variety of things.

For example, it will vary based on the type of heat pump you get, what kind of installers you hire, how long the installers need to work, and so on.

As long as you consider all that, you should be able to come up with the exact cost.

To learn more about heater replacement, contact us here.

Are you wondering about your heater replacement cost? We provide no-obligation estimates! Our experienced HVAC experts have been providing property owners  in Mesa, Gilbert, and Chandler, AZ, with AC and heater repairs, maintenance, and replacements since 1996. Call  (480) 571-7219 or request service online today!

 

Read More about Air Conditioning & Heating Tips: